KINGSTON RAM DDR3 HYPERX FURY RED 4GB 1600MHZ PC3-12800 HX316C10FR/4

KINGSTON
Sold By: Pcp

36,82

3 disponibili

COD: 7466 Categorie: , Tag:

Descrizione

SPECIFICATIONS

CL(IDD) 10 cycles

Row Cycle Time (tRCmin) 48.125ns (min.)

Refresh to Active/Refresh 260ns (min.)

Command Time (tRFCmin)

Row Active Time (tRASmin) 37.5ns (min.)

Maximum Operating Power TBD W*

UL Rating 94 V – 0

Operating Temperature 0o

C to 85o C

Storage Temperature -55o

C to +100o C

*Power will vary depending on the SDRAM used.

FEATURES

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with

starting address “000” only), 4 with tCCD = 4 which does not

allow seamless read or write [either on the fly using A12 or

MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ

pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C,

3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• Height 1.291” (32.80mm) w/heatsink, single sided

component

Print Friendly, PDF & Email

Informazioni aggiuntive

Produttore

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “KINGSTON RAM DDR3 HYPERX FURY RED 4GB 1600MHZ PC3-12800 HX316C10FR/4”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *